XGZP6858A Pressure Sensor (MPXH6115AC6U, MPXHZ6115AC6U, MPXH6400AC6U, MPXHZ6400AC6T1, MPXH6250AC6U, MPXH6250AC6T1, MPXHZ6250AC6T1 Alternative Parts)

  • Wide Ranges: 0kPa~100kPa…700kPa
  • Optional 5V or 3.3V Power Supply
  • Absolute Pressure Type
  • For Non-corrosive Gas or Air or Liquid
  • Calibrated Amplified Analog Signal(Refer to XGZP6858D for I2C interface)
  • Temp. Compensated: 0℃~+60℃(32℉~+140℉)
  • Direct Application, Low Cost


MPXH6115AC6U vs MPXHZ6115AC6U vs MPXH6400AC6U vs MPXHZ6400AC6T1 vs MPXH6250AC6U vs MPXH6250AC6T1 vs MPXHZ6250AC6T1 vs XGZP6858A Comparison

Product CategoryPressure SensorPressure SensorPressure SensorPressure SensorPressure SensorPressure SensorPressure SensorPressure Sensor
Model NumberAs Order GuideMPXH6115AC6UMPXHZ6115AC6UMPXH6400AC6UMPXHZ6400AC6T1MPXH6250AC6UMPXH6250AC6T1MPXHZ6250AC6T1
Pressure Range0kPa~100kPa…700kPa15KPa~115KPa15KPa~115KPa20KPa~400KPa20KPa~400KPa20KPa~250KPa20KPa~250KPa20KPa~250KPa
Pressure TypeAbsoluteAbsoluteAbsoluteAbsoluteAbsoluteAbsoluteAbsoluteAbsolute
Power Supply5V/3.3V4.75V ~ 5.25V4.75V ~ 5.25V4.64V ~ 5.36V4.64V ~ 5.36V4.75V ~ 5.25V4.75V ~ 5.25V4.75V ~ 5.25V
Output TypeAmplified AnalogAnalogAnalogAnalogAnalogAnalogAnalogAnalog
Output0.5~4.5V/0.2~2.7V0.2 V ~ 4.7 V0.2 V ~ 4.7 V0.2 V ~ 4.8 V0.2 V ~ 4.8 V0.3 V ~ 4.9 V0.3 V ~ 4.9 V0.3 V ~ 4.9 V
Measured MediaAir or Non-corrosive Gas or Liquid
Temp. Compensated0~60°C-40°C~125°C-40°C~125°C-40°C~125°C-40°C~125°C-40°C~125°C-40°C~125°C-40°C~125°C
Operating Temp-30~120°C-40°C~125°C-40°C~125°C-40°C~125°C-40°C~125°C-40°C~125°C-40°C~125°C-40°C~125°C
PackagePlastic TubeTubeTubeTubeTape & Reel (TR)/Cut Tape (CT)/Digi-Reel®TubeBulkTape & Reel (TR)/Cut Tape (CT)/Digi-Reel®



  • Tank level measurement, Liquid level measurement, White goods(e.g.washer), Heating, Ventilation, Air conditioning, Filter detection, Industrial controls.
  • Medical gas control system, Hospital beds, Massage device, Engine control/manifold absolute pressure(MAP), Green gas( LPG and CNG) control and measurement.
  • Weather station and weather reporting device barometers, Sport and leisure equipment, Vacuum measurement, pneumatic device, Absolute pressure meter.



XGZP6858A is a perfect silicon pressure sensor offering a ratiometric analog interface for reading pressure over the specified full scale pressure span.

The XGZP6858A incorporates a silicon piezoresistive pressure sensor die and an interior Application Specific Integrated Circuit(ASIC) in a SMT package.

The XGZP6858A is fully calibrated and temperature compensated for specified span, so XGZP6858A pressure sensor satisfy the perfect accuracry, which is designed for a wide range of application in medical care&health, home appliances, consumer electronic, industry, automotive, loT and other pneumatic devices etc by utilizing a microcontroller or microprocessor with A/D inputs.

XGZP6858A pressure sensor is for high volume application at an affordable cost but perfect performance. Customized calibrations(working voltage, output voltage, pressure range etc.) are available.



xgzp6858a pressure sensor dimension


ORDER GUIDE (100kPa=0.1MPa=1bar≈14.5PSI)

xgzp6858a pressure sensor order guide

1. Voltage 5Vdc as default value, add 33 behind model signify 3.3V power supply, e.g. : XGZP6858A00700KPAL033.
2. Custom requirement or parameter, please consult CFSensor for custom code(e.g custom pressure range etc.)



Please consult CFSensor whether required pressure range is under normal production before place order.

1. Unit conversion: 1000hPa=1000mbar≈750mmHg≈100kPa≈14.5PSI≈10mH2O≈1bar=0.1MPa;
2. The offset value can be calibrated from atmospheric pressure(101.3kPa) as required for part of product model.

xgzp6858a pressure sensor pressure range example


Datasheet: XGZP6858A Pressure Sensor V2.6.PDF



Using these sensors products may malfunction due to external interference and surges, therefore, please confirm the performance and quality in actual use. Just in case, please make a safety design on the device (fuse, circuit breaker, such as the installation of protection circuits, multiple devices, etc.), so it would not harm life, body, property, etc even a malfunction occurs. To prevent injuries and accidents, please be sure to observe the following items:

  • The driving current and voltage should be used below the rated value.
  • Please follow the terminal connection diagram for wiring. Especially for the reverse connection of the power supply, it will cause an accident due to circuit damage such as heat, smoke, fire, etc.
  • In order to ensure safety, especially for important uses, please be sure to consider double safety circuit configuration.
  • Do not apply pressure above the maximum applied pressure. In addition, please be careful not to mix foreign matter into the pressure medium. Otherwise, the sensor will be discarded, or the media will blew out and cause an accident.
  • Be careful when fixing the product and connecting the pressure inlet. Otherwise, accidents may occur due to sensor scattering and the blowing out of the media.
  • If the sensor come with sharp PIN, please be careful not to hurt your body when using it.


The information in this sheet has been carefully reviewed and is believed to be accurate; however, no responsibility is assumed for inaccuracies. Furthermore, this information does not convey to the purchaser of such devices any license under the patent rights to the manufacturer. CFSensor reserves the right to make changes without further notice to any product herein.

CFSensor makes no warranty, representation or guarantee regarding the suitability of its product for any particular purpose, nor does CFSensor assume any liability arising out of the application or use of any product or circuit and specifically disclaims any and all liability, including without limitation consequential or incidental damages. Typical parameters can and do vary in different applications. All operating parameters must be validated for each customer application by customer’s technical experts. CFSensor does not convey any license under its patent rights nor the rights of others.

Let's Work On Your Sensor Project!

Let CFSensor team help you explore all of the possibilities to build the perfect sensor!

CFSensor R&D Team
Start typing to see products you are looking for.

Contact Us